2008-2012，英国谢菲尔德大学，机械工程专业，博士
2004-2007，西安交通大学，动力机械及工程专业，硕士
2000-2004，西安交通大学，热能动力及工程专业，学士

2017-至今,bat365官方网站机动学院，工程热物理研究所，副教授，博导
2012-2016,bat365官方网站机动学院，工程热物理研究所，助理研究员
2007-2008, 上海汽车集团技术中心, 助理工程师

• 仿生流场能量采集器设计
• 火焰动态特性、点火特性及燃烧不稳定性研究
• 高精度三维成像优化算法开发
• 图像处理与深度学习算法应用
• 高帧频三维流场测速技术开发
• 相变材料开发、相变传热数值模拟与实验测试

2021-2024，澳大利亚自然科学基金项目，“Enhancing passive cooling using flexible baffles”,主要参与人；
2020-2022，国家自然科学基金委与英国皇家学会合作交流项目，“一种仿生微流体俘能器的非稳态三维流动特性实验研究”，负责人；
2020-2023，国家自然科学基金项目，“基于纹影成像系统的三维粒子追踪测速方法研究”，负责人；
2016-2018，国家自然科学基金委与英国皇家学会合作交流项目，“基于壁面碰撞的火焰和液滴动态特性实验和模拟研究”，负责人；
2014-2016，国家自然科学基金项目，“射流扩散碰撞火焰动态特性研究”，负责人；
2013-2016，上海市自然科学基金项目，“天然气/氢气混合气碰撞火焰点火特性研究”，负责人；
2014-2016，教育部博士点新教师项目，“天然气/氢气混合气射流扩散火焰动态特性研究”，负责人；
2014-2017，西北工业大学横向课题，“组合发动机燃烧流场火焰结构高速动态测试与分析”，负责人；
2017-2020，澳大利亚自然科学基金项目，“Transition of thermal boundary layers on heated flat and curved surfaces”，主要参与人；
2015-2017，新加坡教育部MOE Tier2基金项目，“Novel non-intrusive measurements and simulations of supersonic flows and noise”，主要参与人；
2012-2017,国家973项目子课题“多形态工业余热高效存储的新原理、新技术及其应用”，主要参与人；
2012-2015,bat365官方网站新进教师启动基金“热障涂层的辐射特性研究”，负责人；

Journal papers
[1] Y. Wu, Q. Wang*, C.Y. Zhao Three-Dimensional Droplet Splashing Dynamics Measurement With A Stereoscopic Shadowgraph System, International Journal of Heat and Fluid Flow, 2020, 83:108576.
[2]Q. Wang, Y. Wu, H.T. Cheng, X.H. Mei, C.Y. Zhao (2019) A Schlieren Motion Estimation Method for Seedless Velocimetry Measurement, Experimental Thermal and Fluid Science, 109:109880.
[3] Y. Chen, T. Yao, Q. Wang, K. Luo (2019) Large Eddy Simulation of Impinging Flames: Unsteady Ignition and Flame Propagation, Fuel, 255:155734.
[4] T. Yao, Q. Wang, K. Luo (2019) Formation and Evolution of Flame Kernels in Autoignition of A Turbulent Hydrogen/Air Mixing Layer at 50 atm, Fuel, 255:155753.
[5] Q. Wang, J. Wang, Y. Chen, C.Y. Zhao (2018) Experimental Investigation of Barium Hydroxide Octahydrate as Latent Heat Storage Materials, Solar Energy, 177:99-107.
[6] Q. Wang, Y. Zhang, C.Y. Zhao (2018) Experimental Investigation of Coflow Effect on the Ignition Process of a Methane Jet Diffusion Flame, Experimental Thermal and Fluid Science, 91:184-196.
[7] Q. Wang, R. Wu, Y. Wu, C.Y. Zhao (2018) Parametric Analysis of Using PCM Walls for Heating Loads Reduction, Energy and Buildings, 172:328-336.
[8] Q. Wang, C.Y. Zhao*, Yang Zhang (2015) Time-resolved 3D investigation of the ignition process of a methane diffusion impinging flame, Experimental Thermal and Fluid Science, 62:78-84.
[9] Q. Wang, C.Y. Zhao* (2015) Parametric investigations of using a PCM curtain for energy efficient buildings, Energy and Buildings, 94:33-42.
[10] Q. Wang,* J.S. Yang, H.W. Huang, Y. Zhang, C.Y. Zhao (2014) Three-dimensional Investigation of the Dynamics of a Propane Diffusion Flame, Fuel, 116:448-454.
[11] Q. Wang*, Y. Zhang (2011) High Speed Stereoscopic Shadowgraph Imaging and Its 3D Reconstruction, Measurement Science and Technology, 22: 065302 (9pp).
[12] Q. Wang*, H.W. Huang, Y. Zhang, C.Y Zhao (2013) Impinging Flame Ignition and Propagation Visualization Using Schlieren and Colour-enhanced Stereo Imaging Techniques, Fuel, 108:177-183.
[13] Q. Wang*, H.W. Huang, H.J. Tang, M. Zhu, Y. Zhang (2013) Nonlinear Response of Buoyant Diffusion Flame under Acoustic Excitation, Fuel, 103 364-372.
[14] Q. Wang*, Y. Zhang (2012) Spark Characteristics Investigation of a Gas Turbine Igniter, Combustion Science and Technology, 184(10-11), 1526-1540.
[15] Q. Wang*, Y. Zhang, H.J. Tang, M. Zhu (2012) Visualisation of Diffusion Flame/Vortex Structure and Dynamics under Acoustic Excitation, Combustion Science and Technology, 184(10-11), 1445-1455.
[16] Q. Wang*, H. Gohari Darabkhani, L. Chen, Y. Zhang (2012) Vortex Dynamics and Structures of Methane/air Jet Diffusion Flames with Air Coflow, Experimental Thermal and Fluid Science, 37:84-90.
[17] L. Chen, Q. Wang, Y. Zhang,* (2013) Flow Characterisation of Diffusion Flame under Non-resonant Acoustic Excitation, Experimental Thermal and Fluid Science, 45:227-233.
[18] H.W. Huang,* J. S. Yang, Q. Wang, Y. Zhang (2013) Variation of Hydrocarbon Compositions and Ignition Locations on the Radiative Flame Initiation Characteristics through Multi-dimensional DFCD Incorporated Image Analysis, Fuel, 103: 334-346.
[19] J. Yang, F.M.S. Mossa, H.W. Huang, Q. Wang, R. Woolley, Y. Zhang (2015) Oscillating flames in open tubes, Proceedings of the Combustion Institute, 35(2):2075-2082.
[20] L. Chen, Q. Wang, Y. Zhang* (2012) Flow Characterization of Diffusion Flame in a Standing Wave, Experimental Thermal and Fluid Science, 41:84-93.
[21] H.W. Huang*, Q. Wang, H.J. Tang, M. Zhu, Y. Zhang (2012) Characterization of External Acoustic Excitation on Diffusion Flames Using Digital Colour Image Processing, Fuel , 94:102-109.
[22] H. Gohari Darabkhani*, Q. Wang, L. Chen, Y. Zhang (2011) Impact of Co-flow Air on Buoyant Diffusion Flames Flicker, Energy Conversion and Management, 52:2996-3003.
[23] Z.H. Liu,* G.D. Tao, Lin Lu, Q. Wang (2014) A novel all-glass evacuated tubular solar steam generator with simplified CPC, Energy Conversion and Management , 86:175-185.
[24] Y.Y. Li, Z.H. Liu, Q. Wang (2014) Experimental study on critical heat flux of steady boiling for high-velocity slot jet impinging on the stagnation zone, International Journal of Heat and Mass Transfer, 70:1-9.
[25] Zuohua Huang,* Yong Zhang, Ke Zeng, Bing Liu, Qian Wang, Deming Jiang, (2006) Measurements of Laminar Burning Velocities for Natural Gas-Hydrogen-Air Mixtures, Combustion and Flame, 146:302–311.
[26] Zuohua Huang,* Yong Zhang, Qian Wang, Jinhua Wang, Deming Jiang, and Haiyan Miao, Study on Flame Propagation Characteristics of Natural Gas-Hydrogen-Air Mixtures, Energy & Fuels, 20 (2006) 2385-2390.

Book chapters
[1] Q. Wang, Y. Zhang, C.Y. Zhao, Stereoscopic Schlieren/Shadowgraph 3D Reconstruction Techniques and Its applications, Book Chapter in NOVA Edited book “3D Reconstruction: Methods, Applications and Challenges”, 2014.

Conference papers
[1]Y. Wu, Q. Wang, C.Y. Zhao, Three-dimensional Measurement of Droplet Splashing Dynamics with A Stereoscopic Shadowgraph System, 12th Asia-Pacific Conference on Combustion, July 1-5, 2019, Fukuoka, Japan.
[2] Y. Wu, Q. Wang, C.Y. Zhao, C. Lei, 3D Tracing of Particle Transport in Natural Convection Using a Stereoscopic Shadowgraph System, Proceedings of the 16th International Heat Transfer Conference, Aug 10-15, 2018, Beijing, China.
[3] Yiran Chen, Tong Yao, Qian Wang, K.H Luo, Large-eddy simulation and experimental study on a turbulent impinging flame, 8th European Combustion Meeting, April 18-21, 2017, Dubrovnik, Croatia.
[4] Q. Wang, Quantitative Measurement Based on Schlieren/Shadowgraph Images:
From 2D to 3D, Invited talk, 2016 International Workshop on Detonation for Propulsion, July 12-15, Singapore.
[5] Q. Wang, J.S. Yang, Y.R. Wang, Y. Zhang, C.Y. Zhao, Experimental Investigation of Co-flow Effect on Ignition Process of a Methane Jet Diffusion Flame, 25th ICDERS Conference, August 2-7, 2015, Leeds, UK.
[6] Q. Wang*, C.Y. Zhao, Y. Zhang, Experimental Investigation of the Ignition Process of a Methane Diffusion Impinging Flame, 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics,14-26 July, 2014, Orlando, Florida, USA.
[7] J. Yang, F.M.S. Mossa, H.W. Huang, Q. Wang, R. Woolley, Y. Zhang, Oscillating flames in open tubes, 35th International Symposium on Combustion, August 3-8, 2014, San Francisco, California, USA.
[8] D. Shen, C.Y. Zhao*, Q. Wang, Investigation of Heat and Mass Transfer in a Magnesium Hydride Heat Storage Reactor, Proceedings of the 15th International Heat Transfer Conference, IHTC-15, August 10-15, 2014, Kyoto, Japan
[9] Q. Wang, Y. Zhang, C.Y. Zhao, Stereoscopic Schlieren Investigation of a Propane Diffusion Flame, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, June 16-20, 2013, Lisbon, Portugal.
[10] Q. Wang, HW Huang, Y. Zhang M. Zhu, HJ Tang, 3D Visualisation of Diffusion Flame Structure and Dynamics under Acoustic Excitation, 23rd ICDERS Conference, July 24-29, 2011, University of California, Irvine, California, USA;
[11] Q. Wang, Y. Zhang, High Speed Stereoscopic Shadowgraph and Its Digital 3D Reconstruction, 23rd ICDERS Conference, July 24-29, 2011, University of California, Irvine, California, USA;

1、课程名称： ME315 传热学（英文授课）
授课对象：本科生
学时数：24/48
学分：1.5/3
2、课程名称： BE203 工程热力学（英文授课）
授课对象：本科生
学时数：48/48
学分：3/3
3、课程名称： 机械与动力综合实验I-B（英文授课）
授课对象：本科生（仅限普度交换生）
学时数：16/16
学分：1/1

2019，bat365在线平台网站青年教师教学竞赛二等奖；
2015，bat365官方网站优秀教师三等奖，bat365官方网站优秀班主任；
2013,“SMC-bat365官方网站青年学者奖励计划”优秀青年教师（B）类；
2008-2010, ORS奖学金,英国曼彻斯特大学；
2008-2012, 英国石油公司(BP)奖学金；
2010-2012, 国际员工奖学金,英国谢菲尔德大学。