2002.4-2006.6，bat365官方网站，bat365在线平台网站，博士
1999.9-2002.4，西安交通大学，能源与动力工程学院，硕士
1995.9-1999.7，西安交通大学，能源与动力工程学院，本科

2018.12-至今，bat365官方网站，bat365在线平台网站，教授、博士生导师
2010.12-2018.12，bat365官方网站，bat365在线平台网站，副研究员、博士生导师
2006.6-2010.12，bat365官方网站，bat365在线平台网站，团队博士后、讲师

2011.6-2012.6，麻省理工学院（MIT） 机械工程系，访问学者

（1）机械装备多学科分析及低摩擦设计
（2）在线测量与数字孪生
（3）空间执行机构/装备设计开发
（4）机械设计理论与方法

纵向项目：
2022-2026 国家自然科学基金重点项目（52130502），基于跨尺度多学科演化建模的大缸径船用低速机拉缸机理研究，负责人
2019-2022 国家自然科学基金面上项目（51875344），基于双粗糙面热弹塑性接触摩擦与局部润滑退化的低副抗胶合性能研究，负责人
2014-2017 国家自然科学基金面上项目（51375300），内燃机活塞组-缸套系统多尺度混合润滑建模、磨损规律及性能退化机理研究，负责人
2009-2011 国家自然科学基金青年项目（50805091），基于多学科瞬态模型的内燃机时变性能预测和系统退化识别，负责人
2022-2026 国家重点研发计划课题， 2022YFB4201102，负责人
2022-2025 船用发动机重大专项，船用低速机摩擦润滑技术研究，交大负责人
2021-2023 科技部创新方法工作专项课题，***正向创新设计流程方法研究，负责人
2021-2022 上海商用飞机系统工程科创中心联合研究基金项目，***设计方法研究，负责人
2020-2022 国防基础科研计划课题，非稳态***及多学科耦合分析，负责人
2019-2021 上海航天科技创新基金，高精密***问题研究，负责人
2015-2020 工信部高技术船舶研究课题，低速双燃料机高强化指标下的摩擦与润滑技术研究，负责人
2018-2020 国防科工局-中国北方发动机研究所，***在线无线测量，负责人
2017-2019 中国商飞上海飞机设计研究院 ，***建模技术研究，负责人
2007-2008 中国博士后基金项目，基于多学科耦合模型的复杂装备产品瞬态行为预测，负责人
2016-2019 国家自然科学基金面上项目，面向竞争性设计的知识服务方法与应用研究，第二负责人
2011-2013 国家重点实验室课题，复杂机械系统全生命期性能的理论建模与实验研究，第二负责人
2010-2013 国家自然基金重点项目，机械系统集成设计中的知识流理论与建模，研究骨干

横向项目：
2022-2023 美的威灵电机，滑动轴承润滑仿真，负责人
2022-2023 一汽解放，摩擦技术开发，负责人
2021-2023 中国重汽集团，低摩擦技术研究，负责人
2021-2022 潍柴动力，发动机无线测量，负责人
2021-2022 美芝制冷设备公司，涡旋压缩机动力学分析，负责人
2020-2021 中国航发商发公司，航空发动机***机理及寿命预测方法研究，负责人
2020-2021 美芝制冷设备公司，压缩机滑片及***分析改进与试验验证，负责人
2020-2021 北方发动机研究所，***混合润滑分析及结构匹配研究，负责人
2019-2020 一汽解放发动机事业部，***摩擦磨损试验，负责人
2016-2019 安徽环新集团，活塞环-缸套摩擦学分析及低摩擦技术研究，负责人
2017-2018 上海通用泛亚汽车技术中心，含钼盐节能机油对减摩涂层材料性能影响的试验研究，负责人
2018-2020 GF轴承项目，滑动轴承及轴瓦材料应用技术研发，负责人
2016-2018 中车戚所，中低速柴油机活塞环组摩擦学数值模拟，负责人
2015-2016 北京京卫星环境工程研究所，航天器运动件温度无线测量技术开发，负责人
2014-2017 一汽集团技术中心，发动机低摩擦技术和摩擦学测量技术研发，负责人
2014-2016 中原内配，内燃机摩擦副活塞环-缸套关键技术研究，负责人
2015-2015 康明斯东亚研发中心，柴油机连杆大头温度无线测量技术开发，负责人
2015-2016 上海通用泛亚汽车技术中心，发动机关键摩擦副低摩擦技术研究，负责人
2015-2016 无锡柴油机厂，柴油机摩擦副摩擦磨损试验及抗咬合性能评估，负责人
2017-2020 上海天安轴承有限公司，轴承摩擦学和设计技术，项目联系人、第二负责人
2011-2013 一汽集团技术中心，汽车摩擦学新技术和关键零部件优化研究，项目联系人、第二负责人
2009-2012 一汽集团技术中心，内燃机摩擦学技术开发与应用研究，项目联系人、第二负责人

SCI期刊论文：
[1] Shuai Cheng, Yuezhong Feng, Kuangguidong Wang, Xianghui Meng*. A multi-DOF tribo-dynamics analysis of scroll compressor considering wear properties of Oldham’s ring, Tribology International, 2023, 179: 108125.
[2] Chengwei Wen, Xianghui Meng*, Jiaming Gu, Lin Xiao, Shuang Jiang, Hanbing Bi. Starved lubrication analysis of angular contact ball bearing based on a multi-degree-of-freedom tribo-dynamic model, Friction, 2023, https://doi.org/10.1007/s40544-022-0661-2.
[3] Zhan Liu#, Xin Ning#, Xianghui Meng*, Qiucheng Liao, JintaoWang. Starved lubrication analysis for the top ring and cylinder liner of a two-stroke marine diesel engine considering the thermal effect of friction, International Journal of Engine Research, 2023, 24(2): 336–359.
[4] Shuai Cheng, Yuezhong Feng, Kuangguidong Wang, Xianghui Meng*. Tribo-dynamics modeling and analysis of key friction pairs in scroll compressor with floating fixed scroll design, Engineering Applications of Computational Fluid Mechanics, 2022, 16(1): 2270–2285.
[5] Bugao Lyu, Limin Zhang, Xianghui Meng*, Chengen Wang. A boundary lubrication model and experimental study considering ZDDP tribofilms on reciprocating friction pairs, Tribology Letters, 2022, 70: 65.
[6] Zhan Liu, Xianghui Meng*, Limin Zhang, Xing Wang, Weisheng Cheng. Study on the moving cross-hatched textures under starved lubrication based on parallel calculation, Lubrication Science, 2022; 34(7): 493-513.
[7] Zhan Liu, Xianghui Meng*, Limin Zhang, Weisheng Cheng, Xing Wang. Study on the three-dimensional tribo-dynamic analysis of piston ring pack considering the influence of piston secondary motion, Journal of Tribology, 2022, 144: 111802.
[8] Rui Li, Chengwei Wen, Xianghui Meng*, Youbai Xie. Measurement of the friction force of sliding friction pairs in low-speed marine diesel engines and comparison with numerical simulation, Applied Ocean Research, 2022, 121: 103089.
[9] Chunxing Gu*, Di Zhang, Xiaohui Jiang, Xianghui Meng, Shuwen Wang, Pengfei Ju, Jingzhou Liu. Mixed EHL problems: an efficient solution to the fluid-solid coupling problem with consideration of elastic deformation and cavitation, Lubricants, 2022, 10: 311.
[10] Yan Kang, Li hulin, Ding Ning, Jiang Dan, Meng Xianghui. Transient mixed lubrication model numerically for friction and wear of journal bearings under heavy load during start-up, Industrial Lubrication and Tribology, 2022, 74(10): 1174–1185.
[11] Fei Peng, Li Zheng, Yongdong Peng, Congcong Fang, Xianghui Meng. Digital Twin for rolling bearings: a review of current simulation and PHM techniques, Measurement, 2022, 201: 111728.
[12] Congcong Fang* , Anyuan Zhu, Wei Zhou, Yongdong Peng, Xianghui Meng. On the Stiffness and Damping Characteristics of Line Contacts under Transient Elastohydrodynamic Lubrication. Lubricants, 2022, 10: 73.
[13] Shuai Cheng, Xianghui Meng*, Rui Li, Ruichao Liu, Rui Zhang, Kai Sun, Wenxun Ye, Fagang Zhao. Rough surface damping contact model and its space mechanism application, International Journal of Mechanical Sciences, 2022, 214: 106899.
[14] Rui Zhang, Xianghui Meng*, Kai Sun, Qi Li*, Fagang Zhao. An investigation of high and room temperature fretting fatigue of DD6-FGH96 dovetail joint in aero-engine: Experimental and numerical analysis, International Journal of Fatigue, 2022, 154: 106537.
[15] Bugao Lyu, Lilong Jing, Xianghui Meng*, Ruichao Liu. Texture optimization and verification for the thrust bearing used in rotary compressors based on a transient tribo-dynamics model, Journal of Tribology, 2022, 144: 081801.
[16] Zhan Liu, Fuxiang Liang, Liming Zhai, Xianghui Meng*. A comprehensive experimental study on tribological performance of piston ring-cylinder liner pair, Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2022, 236(1): 184–204.
[17] Rui Li, Xianghui Meng*, Jingjin Dong, Wenda Li. Transient tribo-dynamic analysis of crosshead slipper of low-speed marine diesel engines during engine start-up, Friction, 2021, 9(6): 1504–1527.
[18] Congcong Fang*, Xianghui Meng, Wei Zhou, Hongchen Huang. On the tribo-dynamic interactions between piston skirt-liner system and pin assembly in a gasoline engine, Mechanism and Machine Theory, 2021, 166: 104497.
[19] Rui Li, Xianghui Meng*, Ruichao Liu, Rizwan Muhammad, Wenda Li, Jingjin Dong. Crosshead bearing analysis for low-speed marine diesel engines based on a multi-body tribo-dynamic model, International Journal of Engine Research, 2021, 22(8): 2442–2463.
[20] Rui Li#, Lilong Jing#, Xianghui Meng*, Zhan Liu, Rui Zhang. Numerical analysis of vane–slot friction pair in a rolling piston compressor considering deformation and groove design, Tribology International 2021, 162: 107124.
[21] Chengwei Wen, Xianghui Meng*, Congcong Fang, Jiaming Gu, Lin Xiao,Shuang Jiang. Dynamic behaviors of high-speed angular contact ball bearing with a localized defect considering the influence of cage and oil lubrication, Mechanism and Machine Theory, 2021, 162: 104352.
[22] Ruichao Liu#, Lilong Jing#, Xianghui Meng*, Bugao Lyu. Mixed elastohydrodynamic analysis of a coupled journal-thrust bearing system in a rotary compressor under high ambient pressure, Tribology International, 2021, 159: 106943.
[23] Bugao Lyu, Xianghui Meng*, Rui Zhang, Chengwei Wen. A deterministic contact evolution and scuffing failure analysis considering lubrication deterioration due to temperature rise under heavy loads, Engineering Failure Analysis, 2021, 123: 105276.
[24] Chengwei Wen, Xianghui Meng*, Youbai Xie, Ruichao Liu, Xiaoli Kong, Rui Li, Zhan Liu, Congcong Fang. Online measurement of piston-assembly friction with wireless IMEP method under fired conditions and comparison with numerical analysis, Measurement, 2021, 174: 109009.
[25] Rui Zhang, Xianghui Meng*, Bugao Lyu, Kai Sun. A deterministic FE contact analysis of 3-D rough surfaces with textures and comparison with classic statistical contact models, Science China Technological Sciences, 2021, 64(2): 297-316.
[26] Qi Yan, Rui Li, Xianghui Meng*. Tribo-Dynamic Analysis and Motion Control of a Rotating Manipulator Based on the Load and Temperature Dependent Friction Model, Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2021, 235(7) 1335–1352.
[27] Chengwei Wen, Xianghui Meng*, Bugao Lyu, Jiaming Gu, Lin Xiao. Influence of angular misalignment on the tribological performance of high-speed micro ball bearings considering full multibody interactions, Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2021, 235(6): 1168–1189.
[28] Chunxing Gu*, Xianghui Meng, Shuwen Wang, Xiaohong Ding. Study on the mutual influence of surface roughness and texture features of rough-textured surfaces on the tribological properties, Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2021, 235(2): 256-273.
[29] Bugao Lyu, Xianghui Meng*, Rui Zhang, Yi Cui. A comprehensive numerical study on friction reduction and wear resistance by surface coating on cam/tappet pairs under different conditions, Coatings 2020, 10, 485.
[30] Rui Li, Xianghui Meng*, Wenda Li, Jingjin Dong. A new comprehensive tribo-dynamic analysis for lubricated translational joints in low-speed two-stroke marine engines, International Journal of Engine Research, 2020, 21(8): 1336–1361.
[31] Ruichao Liu, Xianghui Meng*, Yi Cui. Influence of Numerous Start-ups and Stops on Tribological Performance Evolution of Engine Main Bearings, International Journal of Engine Research, 2020, 21(8): 1362–1380.
[32] Yi Wang, Limin Wu, Shuo Liu, Mei Li, Xianghui Meng, Yi Cui. Numerical Study on Fretting Wear of Mating Surface Between Piston Crown and Skirt in Heavy Duty Diesel Engine, Journal of Engineering for Gas Turbines and Power, 2019, 141(8): 081013.
[33] Chunxing Gu*, Xianghui Meng, Shuwen Wang, Xiaohong Ding. Modeling a hydrodynamic bearing with provision for misalignments and textures, Journal of Tribology, 2020, 142(4)：041801-1-11.
[34] Zhan Liu, Xianghui Meng*, Chengwei Wen, Suiran Yu, Zhong Zhou. On the oil-gas-solid mixed bearing between compression ring and cylinder liner under starved lubrication and high boundary pressures, Tribology International, 2019, 140: 105869.
[35] Rui Li, Xianghui Meng*, Youbai Xie. A tribological analysis on stuffing box-piston rod system of low-speed marine diesel engines, International Journal of Engine Research, 2019, 20(8-9): 911-930.
[36] Congcong Fang, Xianghui Meng*, Zhaijun Lu, Gang Wu, Dehua Tang, Bo Zhao. Modeling a lubricated full-floating pin bearing in planar multibody systems, Tribology International, 2019, 131: 222-237.
[37] Chunxing Gu*, Xianghui Meng, Shuwen Wang, Xiaohong Ding. Research on mixed lubrication problems of the non-Gaussian rough textured surface with the influence of stochastic roughness in consideration, Journal of Tribology, 2019, 141(12)：121501-1-14.
[38] Congcong Fang, Xianghui Meng*, Youbai Xie, Chengwei Wen, Ruichao Liu. An improved technique for measuring piston-assembly friction and its mutual validation with numerical simulations: under motored condition, Mechanical Systems and Signal Processing, 2019, 115: 657–676.
[39] Chunxing Gu, Xianghui Meng*, Di Zhang. Analysis of the coated and textured ring/liner conjunction based on a thermal mixed lubrication model, Friction, 2018, 6(4): 420-431.
[40] Chengwei Wen, Xianghui Meng*, Wenxiang Li. Numerical analysis of textured piston compression ring conjunction using two-dimensional- computational fluid dynamics and Reynolds methods, Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2018, 232(11): 1467-1485.
[41] Xianghui Meng *, Changya Yu, Youbai Xie, Benfu Mei. Thermal insulation effect on EHL of coated cam/tappet contact during start up[J], Industrial Lubrication and Tribology, 2018, 70(6): 917-926.
[42] Xianghui Meng*, Congcong Fang, Ke Niu. Tribological behavior anisotropy in sliding interaction of asperities on single-crystal α-iron: A quasi-continuum study, Tribology International, 2018, 118: 347-359.
[43] Ruichao Liu, Xianghui Meng*, Peng Li. Transient tribodynamic analysis of crankshaft-main bearing system during engines starting up, Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2018, 232(5): 535–549.
[44] Yang Hu, Xianghui Meng*, Youbai Xie. A new efficient flow continuity lubrication model for the piston ring-pack with consideration of oil storage of the cross-hatched texture, Tribology International, 2018, 119: 443–463.
[45] Rui Li, Xianghui Meng*, Youbai Xie. A new coupling tribodynamic model of crosshead slipper-guide system and piston skirt-liner system of low-speed marine diesel engines, Tribology International, 2018, 117: 189-205.
[46] Xianghui Meng*, Chunxing Gu, Zhang Di. Modeling the wear process of the ring/liner conjunction considering the evaluation of asperity height distribution, Tribology International, 2017, 112: 20-32.
[47] Xianghui Meng*, Chunxing Gu, Youbai Xie. Elasto-plastic contact of rough surfaces: a mixed-lubrication model for the textured surface analysis [J], Meccanica, 2017, 52(7): 1541-1559.
[48] Yang Hu, Xianghui Meng*, Youbai Xie. A computationally efficient mass-conservation-based, two-scale approach to modeling cylinder liner topography changes during running-in, Wear, 2017, 386–387 : 139–156.
[49] Yang Hu, Xianghui Meng*, Youbai Xie, Jiazheng Fan. Mutual influence of plateau roughness and groove texture of honed surface on frictional performance of piston ring–liner system[J], Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2017, 231(7): 838-859.
[50] Yang Hu, Xianghui Meng*, Youbai Xie, Jiazheng Fan. Study on the frictional performance of slide and plateau honed cylinder liners during running-in[J], Industrial Lubrication and Tribology, 2017, 69, 2: 282-299.
[51] Chunxing Gu, Xianghui Meng*, Di Zhang, Youbai Xie. Transient analysis of the textured journal bearing operating with the piezoviscous and shear-thinning fluids [J], Journal of Tribology, 2017, 139(5): 051708-1-20.
[52] Chunxing Gu, Xianghui Meng*, Youbai Xie. A Universal Model for Both Flooded and Starved Lubrication Regimes and Its Application in Ring–Liner System[J], Tribology Transactions, 2017, 60(3): 506-515.
[53] Chunxing Gu, Xianghui Meng*, Youbai Xie, Kong Xiaoli. Performance of Surface Texturing During Start-Up Under Starved and Mixed Lubrication[J], Journal of Tribology, 2017, 139(1): 011702-1-12.
[54] Chunxing Gu, Xianghui Meng*, Di Zhang, Youbai Xie. A transient analysis of the textured journal bearing considering micro and macro cavitation during an engine cycle [J], Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2017, 231(10): 1289-1306.
[55] Chunxing Gu, Xianghui Meng*, Youbai Xie, Di Zhang. The influence of surface texturing on the transition of the lubrication regimes between a piston ring and a cylinder liner[J], International Journal of Engine Research, 2017, 18(8): 785–796.
[56] Congcong Fang, Xianghui Meng*, Xiaoli Kong, Bo Zhao, Hongchen Huang. Transient tribo-dynamics analysis and friction loss evaluation of piston during cold- and warm-start of a SI engine, International Journal of Mechanical Sciences, 2017, 133: 767–787.
[57] Congcong Fang, Xianghui Meng*, Youbai Xie, A piston tribodynamic model with deterministic consideration of skirt surface grooves, Tribology International, 2017, 110: 232–251.
[58] Changya Yu, Xianghui Meng*, Youbai Xie. Numerical simulation of the effects of coating on thermal elastohydrodynamic lubrication in cam/tappet contact[J], Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2017, 231(2) 221–239.
[59] Xianghui Meng*, Congcong Fang, Youbai Xie. Transient tribodynamic model of piston skirt-liner systems with variable speed effects[J], Tribology International, 2016, 94: 640–651.
[60] Xianghui Meng*, Chunxing Gu, Youbai Xie, Wenxiang Li. A two-dimensional starved lubrication analysis method for textured surfaces[J], International Journal of Engine Research, 2016, 17(10): 1062–1076.
[61] Xianghui Meng*, Yang Hu, Youbai Xie. Modeling of the cylinder liner "zero-wear" process by two-scale homogenization technique[J], Wear, 2016, 368-369: 408–422.
[62] Congcong Fang, Xianghui Meng*, Youbai Xie, Bo Zhao. Quasicontinuum investigation of the feedback effects on friction behavior of an abrasive particle over a single crystal aluminum substrate[J], Tribology International, 2016, 98: 48–58.
[63] Chunxing Gu, Xianghui Meng*, Youbai Xie, Yimin Yang. Effects of surface texturing on ring/liner friction under starved lubrication[J], Tribology International, 2016, 94: 591-605.
[64] Chunxing Gu, Xianghui Meng*, Youbai Xie, Jiazheng Fan. A thermal mixed lubrication model to study the textured ring/liner conjunction[J], Tribology International, 2016, 101: 178–193.
[65] Chunxing Gu, Xianghui Meng*, Youbai Xie, Peng Li. A study on the tribological behavior of surface texturing on the nonflat piston ring under mixed lubrication[J], Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2016, 230(4): 452–471.
[66] Chunxing Gu, Xianghui Meng*, Youbai Xie, Di Zhang. Mixed lubrication problems in the presence of textures: an efficient solution to the cavitation problem with consideration of roughness effects[J], Tribology International, 2016, 103: 516–528.
[67] Cheng Jun, Meng Xianghui*, Xie Youbai, Kong Xiaoli. Blow-by and tribological performance of piston ring pack during cold start and warm idle operations[J], Science China-Technological Sciences, 2016, 59(7): 1085–1099.
[68] Jun Cheng, Xianghui Meng*, Youbai Xie, Wenxiang Li. On the Running-in Behavior of Rough Surface of Piston Rings in Mixed Lubrication Regime[J], Industrial Lubrication and Tribology, 2015, 67 (5): 468-485.
[69] Xianghui Meng*, Lipu Ning, Youbai Xie, Victor W Wong. Effects of Connecting Rod Related Design Parameters on Piston Dynamics and Skirt-Liner Lubrication[J], Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 2013, 227(6): 885–898.
[70] Lipu Ning, Xianghui Meng, Youbai Xie. Effects of Lubricant Shear Thinning on the Mixed Lubrication of Piston Skirt-Liner System[J]. Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 2013, 227(7): 1585–1598.
[71] Lipu Ning, Xianghui Meng, Youbai Xie. Incorporation of deformation in a lubrication analysis for automotive piston skirt-liner system[J]. Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 2013,227(6): 654–670.
[72] Xianghui Meng*, Youbai Xie. A new numerical analysis for piston skirt-liner system lubrication considering the effects of connecting rod inertia[J], Tribology International, 2012, 47: 235–243.
[73] Xianghui Meng*, Youbai Xie. Embedded Knowledge Service in Mechanical Product Development[J], The International Journal of Advanced Manufacturing Technology, 2011, 53: 669-679.
[74] Xianghui Meng*, Youbai Xie. Design decomposition for cross-organizational assignment of design tasks[J]. Concurrent Engineering: Research & Applications, 2010, 18(2): 111-119.
[75] Xianghui Meng*，Zuhua Jiang, GQ Huang. On the modules identification for product family development[J]. The International Journal of Advanced Manufacturing Technology, (2007) 35:26-40.
[76] Xianghui Meng*, Zuhua Jiang, Xibin Wang, Deming Jiang. Quasi-Dimensional Multizone Combustion Model for Direct Injection Engines Fueled With Dimethyl Ether[J], Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 2004, 218(D3): 315-322.

1. 设计与制造II，bat365在线平台网站本科生必修课，64学时，4学分
2. 创新思维与现代设计，本科生通识教育核心课程，33学时，2学分

1. 中国机械工程学会摩擦学分会理事
2. 中国内燃机学会新材料与表面技术分会副主任委员
3. 中国机械工程学会摩擦学分会工业摩擦学工作委员会委员
4. 中国机械工程学会摩擦学分会油液监测技术专业委员会委员
5. 机械工程学会高级会员
6. 下列杂志审稿人：Tribology International; Wear; Mechanical Systems and Signal Processing; Tribology Transactions; Journal of Tribology; Journal of Engineering Tribology; International Journal of Engine Research等

2020 bat365在线平台网站最佳导师奖
2020 bat365官方网站优异学士学位论文指导教师
2019 bat365官方网站烛光奖励计划二等奖
2018 河南省科技进步二等奖
2018 bat365官方网站教书育人集体二等奖
2015 bat365官方网站优秀班主任
2008 bat365官方网站优秀博士后